Explorer 2WD V6-245 4.0L (1994)
PARTS ORDERING INFORMATION
Parts will not be direct shipped for this recall Order your parts requirement through normal order processing channels as noted below:
Structural Adhesive Ordering Information
Structural adhesive is only required when performing Service Procedure B (Cracked or torn liftgates.) The following metal or panel bonding adhesives,
or equivalent must be used.
Lord Corporation:
^
FUSOR 109B Metal Bonding Adhesive - 50 ML (1.7 oz) cartridge - uses applicator gun from Safety Recall 97S88. Contains enough adhesive to do
about four (4) vehicles. (Conversion kit 513 for standard caulking gun is also available).
or
^
FUSOR 108B Metal Bonding Adhesive - 300 ML (10.1 oz) cartridge - uses applicator gun 301 available from your local distributor.
^
Obtain locally. Call 1-800-234-FUSOR ext. 3 to find nearest local distributor.
3M Automotive Aftermarket Division:
^
Panel Bonding Adhesive # 08115 - 200ML (approx 6 oz) cartridge
^
One cartridge contains enough adhesive to do about 12 vehicles
^
Obtain from your local 3M distributors. If you need further assistance call 1-800-521-8180 ext. 5165
REPLACEMENT LIFTGATES AND FCS-700 TAGS
Replacements:
The liftgate is only replaced if the sheet metal at the attachment area is cracked or torn beyond the perimeter of the 7-rivet reinforcement plate. However,
you must call the Recall Hotline at 1-800-325-5621 for prior approval.
NOTE:
Do not install Reinforcement Plate Kit on replacement liftgate.
FCS-700 Tags:
To avoid a "charge-back" for the replacement of the liftgate, cut out the damaged section of the liftgate, attach the completed FCS-700 tag to the cut out
piece and return it to Ford Motor Company. (Only return one side if both sides are cracked or torn beyond the perimeter of the 7-rivet reinforcement
plate ).
DEALER PRICE
For latest prices, refer to:
