Explorer 2WD V6-245 4.0L (1994)
Caliper Pin Removal
a. Position the notched end of the tool against the caliper pin (retention tab half), at a 45° angle from the pin retention tabs.
b. Tap the tool with the hammer to compress the retention tabs.
c. As the retention tabs are compressed, move the tool to gain a straight approach to the pin, and continue tapping to drive the pin through the
caliper/spindle groove.
6. Remove the front disc brake caliper from the rotor. If the front disc brake caliper is to be removed for service, disconnect the brake hose from the
front disc brake caliper. If not, secure the front disc brake caliper with wire.
NOTE: do not let the front disc brake caliper hang with its weight on the front brake hose (2078).
Inner Brake Pad
7. Compress the brake shoe hold down spring and remove the inner shoe from the front disc brake caliper.
Outer Pad Removal
8. To remove the outer shoe from the front disc brake caliper, press each ear of the shoe away from the front disc brake caliper, slide the torque
