Explorer 2WD V6-245 4.0L (1994)
Upper Intake Manifold
5. Install upper intake manifold and tighten nuts to 20-25 Nm (15-18 ft lb).
6. Install the ignition coil pack and bracket assembly.
7. Connect the fuel supply and return lines at the fuel supply manifold.
8. Connect the electrical connections at the throttle body, upper intake manifold, lower intake manifold and injectors.
9. Connect all vacuum hoses to the fittings on the upper intake manifold.
10. Install the throttle cable and bracket assembly and the snow/ice shield to the throttle body.
11. Connect the air cleaner air intake duct to the throttle body.
12. Fill and bleed the cooling system.
13. Connect the battery ground cable at the battery.
14. Check for fuel system and oil leaks.
