Explorer 2WD V6-245 4.0L (1994)
4.
Insert the new "recirc" door (E9TZ-19C802-A) into plenum housing (Figures 1 and 2).
5.
Hold the new "recirc" door in place and snap the new crank arm (E9TZ-19A580-A) in place through the plenum housing.
6.
Reconnect the "recirc" door vacuum motor linkage to the crank arm.
7.
Reinstall the heater air plenum housing following the procedure outlined on Page 12-03B-39 of the 1994 Ranger/Explorer Service Manual.
PART NUMBER
PART NAME
E9TZ-19C802-A
Recirc Door
E9TZ-19A580-A
Crank Arm
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION
TIME
951615A
Replace Recirc Door
3.4 Hrs.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
19C802
77
OASIS CODES: 208000, 208300, 208999, 701000, 702000