Explorer 2WD V6-245 4.0L (1994)
16. Tighten the CMP sensor hold-down bolts to 17-21 Nm (13-15 lb ft) using Sensor Adjusting Wrench T94T-12270-A.
17. Disconnect the testing wiring harness and the voltmeter.
16. Tighten the CMP sensor hold-down bolts to 17-21 Nm (13-15 lb ft) using Sensor Adjusting Wrench T94T-12270-A.
17. Disconnect the testing wiring harness and the voltmeter.