Explorer 2WD V6-245 4.0L (1994)
3. Install Mandrel Tool T75L-3517-A1 from the Seal Installation Set over the sleeve, slide one valve sleeve ring over the tool.
4.Slide the pusher Tool T75L-3517-A2 over the mandrel, rapidly push down on the pusher tool, forcing the ring down the ramp and into the fourth
groove of the valve sleeve.
-
Repeat this step three more times, and each time add one of the spacers T75L-3517-A3, under the mandrel tool. By adding a spacer each time,
the mandrel tool will line up with the next groove of the valve sleeve.
5. After installing four valve sleeve rings, apply a light coat of Premium Power Steering Fluid, E6AZ-19582-AA (ESW-M2C33-F) or equivalent to
the sleeve and rings.
