Explorer 2WD V6-245 4.0L (1994)
Suspension Strut / Shock Absorber: Service and Repair
Rear Lateral
NOTES:
^
Forward and rearward motion (relative movement between rubber shock bushing and metal sleeve) at each end of lateral shock is normal. Do not
replace lateral shock if this condition exists.
^
Relative movement between the metal shock sleeve and the frame/axle brackets is not normal. If necessary, tighten frame end bolt to 39-53 ft. lbs.
and axle end bolt to 50-68 ft. lbs. specifications.
1. Raise and support vehicle.
2. Support rear axle with suitable jack stand.