Explorer 2WD V6-245 4.0L (1994)
Shift Modulator: Service and Repair
Vacuum Diaphragm Assembly
Note: This procedure was taken from the Disassembly and Assembly articles of the A4LD Automatic Transmission. For additional information to
access this assembly refer to the Disassembly and Assembly procedures. See: Service and Repair
Removal
Use a 10mm socket to remove one (M6 x 12mm) screw and retainer.
Remove the vacuum diaphragm assembly and throttle valve actuator rod.
Verify that the throttle valve moves freely using flat external snap ring pliers. Then remove the valve with the pliers.
Installation
