Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Cellular Phone: Service and Repair
Antenna
REMOVAL
CAUTION: To avoid damage to the glass, do not pry the mobile telephone antenna base when removing.
1. Disconnect the mobile telephone antenna base cable.
2. Cut the two-way tape holding the mobile telephone antenna base to the glass and remove
INSTALLATION
NOTE: Before applying new two-way tape to install the mobile telephone antenna base, use a suitable cleaner to thoroughly clean the glass.
NOTE: Inside and outside mobile telephone antenna bases must be carefully and accurately aligned.
1. To install, reverse the removal procedure.