Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Wheel Speed Sensor: Service and Repair
Toothed Ring
REMOVAL:
-
Remove the front disc brake rotor.
Removing Front Brake Anti-lock Sensor Indicator
-
Use 2-3 Jaw Puller and Step Plate to remove the front brake anti-lock sensor indicator.
NOTE: Discard the front brake anti-lock sensor indicator.
INSTALLATION:
Installing Front Brake Anti-lock Sensor Indicator
-
Use an appropriate size cylinder and press to install the front brake anti-lock sensor indicator.
NOTE: The front brake anti-lock sensor indicator must be pressed on straight.
-
Install the front disc brake rotor.