Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Brake Caliper: Service and Repair
Front
Anchor Plate
REMOVAL:
^
Remove the brake shoes and linings.
^
Remove the front disc brake caliper anchor plate.
1. Remove the two front disc brake caliper anchor plate bolts.
2. Remove the front disc brake caliper anchor plate.
INSTALLATION:
^
Install the front disc brake caliper anchor plate.
1. Position the front disc brake caliper anchor plate.
2. Install the front disc brake caliper anchor plate bolts.
^
Install the brake shoes and linings.
Disassembly and Assembly
DISASSEMBLY:
-
Remove the front disc brake caliper.
-
Drain remaining brake fluid from the front disc brake caliper.
-
Secure the disc brake caliper in a vise.
Removing Caliper Pistons
-
Remove the caliper pistons.
1. Place a block of wood between the caliper bridge and the caliper pistons.
2. Apply low air pressure to the fluid port in the disc brake caliper.
3. Force out the caliper pistons to the block of wood.
4. Remove the block of wood and the caliper pistons.
-
Remove and discard the piston seals and boots.
