Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Lubricating Rear Disc Brake Caliper Components
CAUTION: Never reuse the piston seal or dust boot.
NOTE:Never reuse brake fluid that has been drained from the hydraulic system or has been allowed to stand in an open container for an extended period
of time.
-
Lubricate the following with High Performance DOT3 Brake Fluid C6AZ- I 9542-AB or DOT3 equivalent meeting Ford specification
ESA-M6C25-A, DOT3.
^ Cylinder bore.
^ Piston seal.
^ Caliper piston.
^ Dust boot.
-
Install the piston seal.
-
Install the dust boot.
