Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
-
Unclip the parking brake rear cable and conduit from the parking brake lever.
INSTALLATION:
-
Clip the parking brake rear cable and conduit to the parking brake lever.
-
Connect the (A) parking brake rear cable and conduit to the (B) rear disc brake caliper anchor plate.
-
Clip the parking brake rear cable and conduit to the brake line clip on top of the rear axle housing.
-
Install the parking brake cable retainer clip.
1. Position the parking brake cable retainer clip.
2. Install the parking brake cable retainer clip bolt.
-
Install the RH parking brake rear cable and conduit to the RH hydraulic brake line clip.
-
Hook the (A) RH parking brake rear cable and conduit to the (B) rear parking brake cable retainer.
-
Install the RH parking brake rear cable and conduit to the LH parking brake rear cable and conduit clip.
-
Connect the RH parking brake rear cable and conduit to the parking brake cable bracket.
1. Install the RH parking brake rear cable and conduit to the parking brake cable bracket.
2. Push the RH parking brake rear cable and conduit into the parking brake cable bracket until the parking brake cable and conduit clip is seated.
-
Connect the (A) RH parking brake rear cable and conduit to the (B) LH parking brake rear cable and conduit at the (C) parking brake cable
equalizer.
