Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
-
Connect the (A) parking brake intermediate cable to the (B) LH parking brake rear cable and conduit.
Installing Front Wheel/Tire Assembly
-
Install the front wheel and tire assemblies.
1. Install the wheel and tire assemblies.
2. Install the lug nuts and lower the vehicle.
3. Tighten the lug nuts.
4. Install the center cap.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Relieving Tension On Parking Brake System
-
Apply tension to the parking brake system.
1. Hold the front parking brake cable and conduit taught.
2. Remove the retainer.