Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
5. Rotate the cap clockwise until the locking arm on the cap engages the tab on the servo.
6. Snap the speed control actuator cable and the accelerator cable together in the clip and install the cables onto the accelerator cable bracket.
7. Position the accelerator control splash shield and install the bolt.
8. Install the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
