Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
NOTE: Be sure the crankshaft rear sealing surface is clean and free of any rust or corrosion. To clean the crankshaft rear sealing surface, use
extra-fine emery cloth or extra-fine 0000 steel wool with Metal Surface Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification
WSE-MSB392.
2. Install the rear main oil seal installing tool.
3. Install the crankshaft rear oil seal until it is flush with the block.
4. Install the flywheel.