Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
10.
Turn the crankshaft clockwise to position the number one cylinder at TDC and install Crankshaft Holding Tool T97T-6303-A to hold the
crankshaft in position. This will prepare the engine for cam timing. See Figure 6.
11.
Install Camshaft Gear Holding Tool T97T-6256-B and Adapter T97T-6256-A onto the RH camshaft sprocket and tighten the top two clamp bolts
of the Camshaft Gear Holding Tool T97T-6256-B to 10 Nm (89 lb-in). See Figure 7.
CAUTION
The RH camshaft sprocket bolt is a left-hand threaded bolt.