Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Exhaust Manifold: Service and Repair
Right Side
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the two RH exhaust manifold to exhaust inlet pipe bolts.
4. Lower the vehicle.
5. Remove the six nuts and the RH exhaust manifold and gasket.
INSTALLATION
1. Position the RH exhaust manifold and gasket and install the six nuts.
NOTE: Use new exhaust manifold gaskets and exhaust manifold nuts.
