Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
EGR Backpressure Transducer: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 6 km (10 mi) or more to relearn the strategy.
2. Disconnect the EGR backpressure transducer electrical connector.
3. Disconnect the transducer hoses.
4. Remove the transducer bolts and the EGR backpressure transducer.