Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
5.
From inside the vehicle, with bracket held in original position, insert bolts through holes in bracket and dash panel.
6.
On engine side of dash panel, assemble on (1) Flatwasher (391982-S191) (7/16" ID x 1.0" OD), and one (1) M8 prevailing torque hex flange Nut
(W520112-S309) on each of the bolts. Tighten nuts to a torque of 27-33 Nm (20-24 lb-ft).
7.
Replace pedal and pivot bolt and tighten pivot bolt to a torque of 9-12 Nm (80-108 lb-in).
8.
Check accelerator pedal for proper operation.
PART INFORMATION
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Cover
OPERATION
DESCRIPTION
TIME
002403A
Repair Of Accelerator
0.6
Pedal Bracket
DEALER CODING
OASIS CODES: 111000, 404000, 614500
