Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Knock Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn its strategy.
2. Remove the lower intake manifold.
3. Remove the Knock Sensor (KS).
1
Remove the KS bolt.
2
Remove the KS.
INSTALLATION
1. Install the KS.
1
Position the KS.
2
Install the KS bolt.