Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Install the new safety belt(s) using the appropriate instructions. Perform Functional Test Procedure in Testing and Inspection.
B-Pillar
REMOVAL
1. Remove the safety belt guide bolt.
1
Remove the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
2. Lift the floor carpet and use T55 "TORX" Bit to remove the floor anchor bolt.
3. Remove the B-pillar trim panel.
4. Remove the front safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolts.
2
Remove the front safety belt retractor.
INSTALLATION