Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
2
Install the cover.
C-Pillar
REMOVAL
1. Remove the safety belt guide bolt.
1
Remove the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
2. Lift the floor carpet and use T55 "TORX" Bit to remove the floor anchor bolt.
3. Remove the quarter trim panel.
4. Remove the front safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolts.
2
Remove the front safety belt retractor.
INSTALLATION