Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Seat Belt Retractor: Service and Repair
Rear Seat Belt, Retractor and Tongue
REMOVAL
1. Fold the rear seat down to load floor position.
2. Remove the rear safety belt buckle and retractor assembly.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the rear safety belt buckle and retractor assembly.
INSTALLATION
NOTE: Make sure that safety belt webbing is not twisted prior to installation.
To install, reverse the removal procedure. Check for proper operation.