Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
9. Tighten the servo cover bolts in the sequence show
10. Install the transmission fluid filter.
(1) Install the transmission fluid filter.
(2) Install the transmission fluid filter bolt.
11. Install the transmission fluid pan.
(1) Position a new transmission fluid pan gasket on the transmission fluid pan.
(2) Install and align the transmission fluid pan.
-
Loosely install the 18 transmission fluid pan bolts.
12. Tighten the transmission fluid pan bolts.
-
Use a crisscross sequence to tighten the transmission fluid pan bolts.
13. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.