Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
-
Inspect for cracks in the roller cage and wear on the roller clutch, the press fit of the one-way clutch to the center shaft, and the spring and
roller cage for bent or damaged spring retainers.
CAUTION: Do not remove the front one-way clutch. Damage to the clutch may occur if it is removed.
3. Inspect the one-way clutch.
-
Temporarily insert the front planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch.
-
The planetary gear must rotate counterclockwise and hold when rotated clockwise.
-
Remove the planetary gear carrier assembly.
ASSEMBLY
1. Install the center shaft and one-way clutch
(1) Install the center shaft and one-way clutch.
(2) Install the center shaft retaining ring.
