Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Torque Converter: Service and Repair
Flushing
1. Following the instructions included with the Torque Converter/Transmission Oil Cooler Cleaner, flush the torque converter.
CAUTION: Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.
2. After flushing, drain the remainder of the solvent through the converter drain plug.
3. Add 1.9 liter (2 qt.) of clean MERCON V Automatic Transmission Fluid XT-5-QM or equivalent MERCON V approved fluid into the converter
fluid filler tube and agitate by hand.
4. Thoroughly drain the solution through the converter drain plug and impeller.