Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
16. Install the SS2, SS4, TCC and EPC solenoids.
(1) Install the TCC solenoid.
(2) Install the SS2 and SS4 solenoids.
(3) Install the EPC solenoid.
CAUTION: All solenoid electrical connectors must face upward on installation.
NOTE:
-
All shift solenoids are interchangeable.
-
If the TCC valve came out during disassembly, use caution when installing the torque converter clutch solenoid.
17. Install the solenoid clamp and the solenoid clamp bolt.
(1) Position the solenoid clamp on the main control valve body.
(2) Install the solenoid clamp bolt.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
18. Install the SS1 and the SS3 shift solenoids.
CAUTION: The shift solenoid electrical terminals must face up on installation.
NOTE: The shift solenoids are interchangeable.
