Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
NOTE:
-
Triangles on bearing cups must point outboard.
-
Apply pressure toward the left side to make sure the left bearing cup is seated.
13. Install progressively larger shims on the right side until the largest shim selected can be inserted by hand.
14. Install the right side bearing cap.
(1) Install the right side bearing cap.
(2) Tighten the bolts.
15. Rotate the differential case to make sure it rotates freely.
16. Use Dial Indicator With Bracketry to measure ring gear backlash.
-
Turn the ring gear without turning the pinion gear and record the measurement.
NOTE: Specifications shown are preferred backlash.
