Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
17. To increase backlash, install a (A) thicker shim and a (B) thinner shim as shown.
-
If backlash is not within specification, correct by increasing the thickness of one differential bearing shim and decreasing the thickness on the
other differential bearing shim by the same amount.
NOTE: The bearing caps must be removed before shims can be installed.
18. To decrease backlash. install a (A) thicker shim and a (B) thinner shim as shown.
NOTE: The bearing caps must be removed before shims can be installed.