Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
5. Index the companion flange to the pinion stem.
6. Use Companion Flange Holding Tool to remove the pinion nut.
CAUTION: Before proceeding, place a drain pan under the axle housing.
7. Use 2-Jaw Puller to remove the companion flange.
NOTE: Inspect the companion flange for burrs and replace as necessary. Make sure that the surfaces of the companion flange have not been
damaged during removal. The end of the companion flange that contacts the bearing cone, the nut counterbore, and the seal surface must be
smooth and free of nicks.
INSTALLATION
1. Lubricate the companion flange splines.
-
Use Motorcraft SAE 75W90 4x4 Axle Lubricant or equivalent meeting Ford specification WSP-M2C201-A.
2. Align the index marks and position the companion flange.
