Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
5. Remove the manual control outer lever nut and manual control outer lever.
6. Remove the DTR bolts and the DTR sensor.
INSTALLATION
1. Install the DTR sensor.
1
Position the DTR sensor.
2
Loosely install the DTR bolts.
2. Adjust the DTR sensor.
1
Install TR sensor alignment tool into the three slots on the DTR sensor.
2
Tighten the DTR bolts.
3. Install the manual control outer lever.
1
Install the manual control outer lever.
2
Install the manual control outer lever nut. Tighten to specifications.
