Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Wiper Pivot: Service and Repair
Mounting Arm and Pivot Shaft-Rear
REMOVAL
CAUTION: Use a shop towel or similar device to protect the vehicle finish when performing the procedure.
1. Raise the wiper arm into the replacement position.
2. Remove the wiper arm.
1. Release the clip at the base of the pivot arm.
2. Remove the wiper arm from the pivot shaft.
INSTALLATION
1. Turn the rear wiper switch on and allow the motor to operate for at least one cycle.
2. Turn the rear wiper switch off.