Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Remote Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the steering wheel controls.
1
Carefully remove the steering wheel controls.
2
Disconnect the steering wheel controls.
NOTE: The steering wheel is leather wrapped and should be protected when removing the steering wheel controls.
INSTALLATION
1. Install the steering wheel controls.
1
Connect the steering wheel controls.
2
Install the steering wheel controls.
2. Connect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
