Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
8. CAUTION: The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter modulator
valve.
CAUTION: Shift solenoids may pop out of their bore. This may damage the solenoids.
Remove the EPC and SSB solenoids.
1. Remove the solenoid clamp bolts.
2. Remove the solenoid clamp.
3. Remove the EPC and SSB solenoids.
9. CAUTION: Do not pry on the other wires or damage the connector case surface.
Disconnect the turbine shaft speed (TSS) sensor electrical connector from the transmission case (16 pin) electrical connector.
1. Disconnect the TSS sensor electrical connector.
2. Remove from the TSS sensor wire locator.
10. CAUTION: Do not overstretch the retaining spring.
Remove the transmission case (16 pin) electrical connector retaining spring.
