Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Seals and Gaskets: Service and Repair
Solid Rear Axle
Special Tools
Removal
1. Remove the pinion flange.
2. Force up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal
is removed.
Installation
1. Lubricate the new rear drive pinion seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1 C75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a new
seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.