Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Door Lock Motor: Service and Repair
Rear
Heavy Duty Riveter
SPECIAL TOOL(S)
REMOVAL
1. Remove the rear door trim panel.
2. Remove the rear door watershield.
3. Remove the power door lock actuator.
1. Disconnect the electrical connector.
2. Drill out the rivet.
3. Disconnect the actuator rod.
4. Remove the actuator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Use Heavy-Duty Riveter to install the actuator rivet.