Explorer 2WD V6-245 4.0L VIN X SFI (1999)
8. Install the hog rings.
1
Fold back the seat cushion trim cover to the hog ring installation position.
2
Install the hog rings.
NOTE: The hog rings along the front of the seat are shown; the hog rings along either side are similar.
9. Invert the seat cushion trim cover.
10. Install the seat cushion frame.
1. Position the seat cushion frame.
2. Hook the seat cushion trim cover J-clips.
11. If equipped, connect the seat cushion heating element electrical connector.
12. Connect the seat backrest recliner actuator.