Explorer 2WD V6-245 4.0L VIN X SFI (1999)
6. Remove the slippers.
7. CAUTION: Use a hub-mount brake lathe if necessary to machine the rear brake disc.
Measure the rear brake disc, and resurface as necessary. Install a new rear brake disc if beyond specification.
Installation
1. Clean the slipper mating surface, and install the slippers.
2. CAUTION: Install new brake pads in full axle sets. Do not install new brake pads on only one side of vehicle.
Install the brake pads.
3. Install the rear disc brake caliper.
4. Verify correct brake operation.