Explorer 2WD V6-245 4.0L VIN X SFI (1999)
8. Remove the rear brake shoe hold-down springs.
9. Remove the rear brake shoes and linings along with the inboard brake shoe retracting spring.
10. Inspect the components for excessive wear or damage and install new as required.
Installation
1. NOTE: Lubricate the brake shoe contact point before installation of rear shoes using Silicone Brake Caliper Grease and Dielectric Compound
D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound meeting Ford Specification ESE-M1C171-A.
Install the rear brake shoes and linings along with the inboard brake shoe retracting spring.
2. Install the brake shoe hold-down springs.