Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Engine Mount: Service and Repair
Removal
1. Remove the engine cooling fan.
2. Remove the nuts.
3. Remove the nuts.
4. Lift the engine sufficiently to disengage the engine support insulator from the engine support brackets.
5. Remove the nuts and remove the engine support insulators.
Installation
1. Position the engine support insulator on the engine support mounting bracket and install the nuts.
2. Lower the engine until the engine support insulator stud engages the slot of the engine support bracket.
3. Install the nuts.
4. Install the nuts.