Explorer 2WD V6-245 4.0L VIN X SFI (1999)
9. Pull the seal from the A/C compressor.
INSTALLATION
1. Clean the A/C compressor nose area.
CAUTION: Do not allow dirt or other foreign materials to enter the A/C compressor.
2. Place the shaft seal on the seal protector. Lubricate the shaft seal and protector with PAG compressor oil, YN-12-C, F7AZ-19589-DA or
equivalent meeting Ford specification WSH-M1C231-B.
3. Position the shaft seal and the Seal Protector over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the Shaft Seal Replacer until seated.
