Explorer 2WD V6-245 4.0L VIN X SFI (1999)
5. Disconnect the heater core.
1
Disconnect the heater water hoses.
2
Disconnect the heater water control valve vacuum hose.
6. Position the speed control servo aside.
1
Remove the (A) bolt and disconnect the (B) servo electrical connector.
2
Position the speed control servo aside.
7. Remove the two nuts and the two screws from the windshield washer reservoir/coolant recovery tank. Set the tank aside.
8. Use Spring Lock Coupling Disconnect Tool (3/4 in) to disconnect the A/C manifold and tube from the suction accumulator/drier, please refer to
Heating and Air Conditioning/Coupler HVAC/Service and Repair/ See: Coupler HVAC/Service and Repair