Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Evaporative Canister Filter: Service and Repair
REMOVAL
1. Disconnect the canister vent solenoid hose assembly.
2. Remove the evaporative emission dust separator.
^
Remove the nuts.
^
Remove the dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
2. Leak test the evaporative emissions system. See: Testing and Inspection/Component Tests and General Diagnostics/EVAP System Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle.
