Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Evaporative System Service Port: Service and Repair
REMOVAL
1. Remove the clip.
2. Disconnect the hoses.
3. Remove the test port assembly.
^
Disconnect the fitting.
^
Remove the test port assembly.
INSTALLATION
1. To install, reverse the removal procedure.
2. Leak test the evaporative emissions system. See: Testing and Inspection/Component Tests and General Diagnostics/EVAP System Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle.
