ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Liquid Vapor Separator, Evaporative System > < Evaporative Vapor Pressure Sensor|Description and Operation
Page 1
background image

Evaporative Vapor Pressure Sensor: Service and Repair

REMOVAL

1. Remove the fuel tank.

2. Remove the fuel tank pressure sensor. 

1

Disconnect the electrical connector.

2

Press down and rotate the fuel tank pressure sensor counterclockwise and remove it from the fuel tank.

CAUTION:  The fuel tank pressure sensor must be disengaged from the fuel tank before it can be removed. Push down and rotate the fuel
tank pressure sensor counterclockwise to disengage it from the fuel tank. Failure to do so can cause damage to the fuel tank pressure sensor or
the fuel tank.

INSTALLATION

1. To install, reverse removal procedure.
2. Leak test.  See: Testing and Inspection/Component Tests and General Diagnostics/EVAP System Leak Test
3. Perform the Evaporative Emissions Running Loss Monitor Repair Verification Drive Cycle. 

Liquid Vapor Separator, Evaporative System > < Evaporative Vapor Pressure Sensor|Description and Operation