Explorer 2WD V6-245 4.0L VIN X SFI (1999)
8. Roll the seat back trim cover to position the deployment chute around the side air bag module.
9. Position the air bag deployment chute.
1. Insert the outboard side of the air bag deployment chute between the seat back pad and the side air bag module, pulling it around the outboard
side of the seat back frame.
2. Insert the inboard side of the air bag deployment chute between the seat back pad and the side air bag module from the inboard side of the seat
back.
WARNING:
^
CHECK THE SIDE AIR BAG DEPLOYMENT CHUTE AND ZIPPER MUST NOT BE REPAIRED. IF THERE IS ANY DAMAGE
TO THE DEPLOYMENT CHUTE OR ZIPPER THE SEAT BACK TRIM COVER AND DEPLOYMENT CHUTE MUST BE
INSTALLED NEW AS A UNIT.
^
IF THE AIR BAG DEPLOYMENT CHUTE IS NOT PROPERLY POSITIONED AND COMPLETELY ZIPPED, THE SIDE BAG
MAY NOT DEPLOY PROPERLY.