Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Wheel Speed Sensor: Service and Repair
Front
Removal
1. Raise and support the vehicle.
2. Disconnect the front anti-lock brake sensor wire from the vehicle frame.
1
Disconnect the electrical connector.
2
Unclip the front anti-lock brake sensor wire from the vehicle frame.
3. Remove the front anti-lock brake sensor.
1
Remove the bolt.
2
Remove the front anti-lock brake sensor.
Installation
1. NOTE: Plug the sensor mount opening and thoroughly clean the mounting surface. Apply High Temperature 4x4 Front Axle and Wheel Bearing
Grease E81Z-19590-A meeting Ford specification ESA-M1C198-A.
To install, reverse the removal procedure.
