Explorer 2WD V6-245 4.0L VIN X SFI (1999)
7. Remove the LH tie-rod end.
^
Count and record the number of turns required to remove the tie-rod end.
8. Remove the front stabilizer bar.
^
Mark the driver side end of the stabilizer bar for correct installation.
9. Remove the power steering cooler to crossmember nuts.
10. Remove the power steering fluid cooler.
1. Separate the power steering fluid return hose from the power steering fluid cooler.
^
Allow the system to drain.
2. Disconnect the power steering return line hose.
3. Remove the power steering fluid cooler.
11. Disconnect the lines at the gear.