Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Torsion Bar: Service and Repair
Special Tools
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result
in unexpected inflation or deflation of the air springs or shocks, which can result in shifting of the vehicle during these operations.
Raise the vehicle on a hoist.
2. Remove the torsion bar cover plate.
1. Remove the torsion bar cover plate bolts.
2. Remove the torsion bar cover plate.